Velleman-projects K4305 Assembly instructions Uživatelský manuál stáhnout pdf (Strana 3)

__________________________________________________________________________________________________________________________________________________________

ASSEMBLY STEPS

Required tools to assemble the kit:

A small soldering iron of max. 40W.

Thin (1mm) solder, do not use any flux.

A small cutter to trim the excess wires.

Mount the compo-

nents against the

PCB surface and

carefully solder the

leads.

Obtain cone- shaped,

shiny soldered joints

by heating the com-

ponent leads suffi-

ciently.

This solder joint

results in a bad

connection.

Trim the excess

wires up to the

level of the sol-

der

• Careless assembly will certainly lead to troubles.

• Insert the part, oriented correctly, into its correct holes on the PCB.

• Mount the components in the correct order as stated in this manual.

• The component values in the diagram are for reference only. The val-

ues in this partlist are correct and must be followed.

• Use the boxes q to tick off your progress.

F Before starting to build, also read the general guidelines

1 2 3 4 5 6 7 8 ... 13 14

Komentáře k této Příručce

Žádné komentáře

Velleman-projects K4305 Assembly instructions Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Hardware Velleman-projects K4305 Assembly instructions